User's Manual

- 10 -
System Requirements
Before you install the AI108 wireless bridge, be sure you have the following items on-
hand:
• An AC power outlet (100 to 240 V, 50 to 60 Hz) which will supply power to the
indoor units on both sides of the wireless connection
• An outdoor unit mast with a diameter of 1.9 inches (50 mm) to 4.5 inches (115
mm)
• An available RJ-45 (UTP) port on a 10/100Mbps Ethernet hub or switch
• Web browser for software configuration
The AI108 wireless bridge has been designed to withstand normal handling
procedures, but reasonable precautions should be exercised during the installation,
particularly with regard to static discharge.
• Make sure that you are adequately grounded by touching the bare metal
surface on the back of a computer or networking device before installing the
indoor and outdoor units.
• Avoid moving around the work area in order to eliminate static charge buildup.
• If possible, do not work on a carpeted area.