User's Manual

- 16 -
Software Configuration
The network and security parameters of your wireless bridge pair are configured by
using the built-in AI108 web server. The AI108 web server greatly simplifies the
configuration process by allowing the user to access all parameters and settings
through a single, consistent user interface.
Note: For added security, this configuration utility is only accessible within two
minutes of power-up. This utility is not available during normal bridge operation.
Getting Started
The factory default IP address and port number of the AI108 wireless bridge is
192.168.1.70:8080. Type that string into the address field of your browser and press
the Return key to load the AI108 web server. You will be prompted for a user name
and password at that point. Note: See section Logging in to the AI108 Web Server
below for information on default settings.
Logging in to the AI108 Web Server
The AI108 requires you to enter a user name and password to gain access to the
configuration utility. The default value for the fields User Name and Password is
“Airaya”.