User's Manual

- 18 -
The following parameters can be viewed from the Current Settings tab:
• Software Version - Current software (firmware) version installed and
running on the bridge you are working with. This value is formatted as a
date code.
• Hardware Version - Current hardware revision of the local bridge.
• IP Address - Current IP address of the local bridge you are working with.
• Subnet Mask - Current subnet mask of the local bridge you are working
with.
• Gateway Address - Current gateway address of the local bridge you are
working with.
For a detailed description of the IP Address, Subnet Mask, and Gateway Address
parameters, please refer to section Link Setup Tab.
• Local Bridge MAC Address - MAC address of the local bridge you are
working with.
• Remote Bridge MAC Address - MAC address of the remote bridge this
local bridge is currently paired with.
For additional information on the Bridge MAC Address parameters, please refer
to MAC Address Authentication in section Link Setup Tab.
• Active Encryption Key - WEP key currently providing data encryption over
the wireless link.
•
Active Encryption Key Length - Length of the encryption key currently
being utilized on this pair of bridges.
For a detailed description of the WEP protocol and related parameters, please
refer to section Link Security Tab.