User Manual

- 10 -
Airaya
WirelessGRID
-
300 Backhaul Radios
Outdoor Nema4 Enclosure
The metal enclosure of WirelessGRID-300 bridge has been designed for
maximum durability for outdoor use in a range of weather conditions.
They are watertight and meet NEMA/EEMAC Type 4 and IP66
specifications.
Cabling and Cable Bulkhead Fittings
The outdoor version of the WirelessGRID-300 bridge includes Category 5e
cables designed for outdoor applications. This cable supports DC Power
Over Ethernet for easy installation. The bulkhead fitting is an IP67-rated
Ethernet Fitting for use in outdoor applications.
Remote PoE Power
Gigabit Power Over Ethernet (IEEE802.3AF) is an integral part of the
WirelessGRID-300 bridge. The injector is capable of providing power at
the full distance specified by the IEEE 802.3 Ethernet specification (100
meters).
Backhaul / Point-to-point Architecture
Figure 1. This diagram illustrates a typical use scenario of a
WirelessGRID-300 bridge interconnecting two networks in separate
facilities.
For complete information on model numbers,
please refer to the ordering guide located on the
AIRAYA website.