User Manual

Airaya
- 11 -
Airaya
Proven, Fast and Affordable Outdoor Wireless Bridges
System Requirements
Before installing the WirelessGRID-300 bridge, be sure you have the
following items on-hand:
ü An AC power outlet (100 to 240 V, 50 to 60 Hz) to supply power to
the indoor injector units on both sides of the wireless link
ü An outdoor unit mast with a 1 to 4 inch (25.4 to 101.6 mm)
diameter
ü An available RJ-45 (UTP) port on a 1000/100 Mbps Ethernet switch
or router
ü Web browser or telnet (CLI) application for software configuration
The WirelessGRID-300 bridge has been designed to withstand normal
handling procedures, but reasonable precautions should be taken during
installation, particularly with regard to static discharge.
· Make sure that you are adequately grounded by touching the bare
metal surface on the back of a computer or networking device
before installing the indoor and outdoor units.
· Avoid moving around the work area in order to eliminate static
charge buildup.
· If possible, do not work on a carpeted area.