User Manual

Airaya
- 19 -
Airaya
Proven, Fast and Affordable Outdoor Wireless Bridges
Follow these steps to add a bridge to the WirelessGRID-300 authorization
list:
1. Enter the MAC Address of a new bridge.
2. Press Add New to include the new bridge in the WirelessGRID-300
list.
3. Confirm that the new entry was entered correctly by reviewing the list
at the bottom of the page.
4. If the device is a base station, continue adding bridges until you are
finished.
5. Press Reboot to cycle power and enable new settings.
Follow these steps to remove a bridge from the WirelessGRID-300 list:
1. Press Delete.
2. On the next screen, press Delete to confirm or Cancel to return to
the WirelessGRID-300 list screen without removing the entry.
TIP
Each bridge contains a WirelessGRID-300 authorization list, and all
bridges require reciprocal entries to communicate. Subscriber units and
point-to-point bridges support one WirelessGRID-300 list entry.