User Manual

- 30 -
Airaya
WirelessGRID
-
300 Backhaul Radios
Remote Bridge (SU Station) Statistics Tab
This screen is used to view the current statistics of a remote bridge
communicating with the (local) bridge you are logged into.
This screen provides the following data:
Bridge Status
NOTE
Tip: To allow WirelessGRID-300 bridges to monitor their own signal
strength and packet error rates and dynamically adjust data rates, you
can set Data Rate on the Radio Settings tab to "Best". This will allow the
bridge to monitor signal strength on a packet-by-packet basis, adjusting
data rate accordingly. If signal strength is not optimum, the radio will
adapt and change to a lower modulation, which in turn lowers the radio
data rate, but provides a higher effective TCP/IP data rate by increasing
radio receiver sensitivity and reducing the packet error rate. This adaptive
data rate ability provides for better overall quality and reliability of the
link.
Tip: When running time sensitive applications such as VoIP and/or
VideoIP cameras, setting bridges to specific data rates reduces latency
and improves performance on these systems.