User Manual

Airaya
- 33 -
Airaya
Proven, Fast and Affordable Outdoor Wireless Bridges
Settings include:
Host Name – The IP address of FTP server where new firmware is
located.
User Name – Authorized User Name for accessing the FTP server.
Password – Valid Password for accessing the FTP server.
Image Path –Path to firmware image on the FTP server. If firmware
image is located in the root directory of your FTP server, leave this field
empty.
Image Name – Filename of firmware image.
Update Firmware –Button to start upload procedure for new firmware.
Follow these steps to update a bridge with new firmware image:
1. Enter the IP Address of your FTP server in the Host Name field.
2. Enter your authorized User Name for accessing the FTP Server in the
User Name field.
3. Enter your Password for accessing the FTP Server in the Password
field.
4. Enter a valid path to the firmware image on the FTP server in the
Image Path field. If firmware image is located in the root directory
of your FTP server, leave this field empty.
5. Enter the filename of the firmware image you are using to update the
bridge in the Image Name field.
6. Click on Update Firmware button to load new firmware image into
bridge.
7. Press Reboot to enable new key settings.
Help Tab
The AIRAYA online help system provides useful information about all
parameters and menus available in the WirelessGRID-300 NMS and
configuration utility. Select the Help tab on any screen and the
appropriate topics will appear in a pop-up style browser window.