User Manual

- 8 -
Airaya
WirelessGRID
-
300 Backhaul Radios
Introduction
AIRAYA WirelessGRID-300 series wireless bridges have been designed to
provide transparent, high-speed data communications between two or
more locations.
The WirelessGRID-300 utilizes detachable antennas and is an outdoor
radio product, with external antenna connections. The product requires
installation by a certified professional installer, only.
WirelessGRID-300 firmware will not allow the end user to change or
modify the country code settings of this product. The availability of
specific channels and/or operational frequency bands are country
dependent and are programmed in firmware to match the intended
destination, by AIRAYA Corp. factory personnel only.
This solution offers proven, fast, reliable, and secure wireless connectivity
with considerable cost savings compared to wired alternatives. Utilizing
proprietary 5.725-5.850 GHz technology, the WirelessGRID-300 bridge
can easily replace an Ethernet or multiple T1 connections or seamlessly
integrate into a newer 1000/100 Mbps Ethernet Local Area Network
(LAN).
Package Checklist
Each WirelessGRID-300 bridge comes in either one or two cartons,
depending on the model ordered, and contains the following components:
ü Two outdoor units with either two (2) or three (3) N-type Female
Connectors
ü Pole mounting hardware and brackets
ü Two indoor injector units and full range power supplies for remote
power
ü Two 48 VDC .4 Amp power bricks
ü Two UV-protected outdoor-rated cables (length specified by part
number) or Bulkhead fittings for Gigabit remote PoE power cables.
Please register your product online at: www.airaya.com in the support/
product registration section of our web site. Note: Free technical support
is only available to registered users of AIRAYA equipment.
Please inform your dealer if there are any incorrect, missing, or damaged
parts. If possible, retain the carton and original packing materials for
repacking purposes in case you need to return a radio bridge for repair.