User's Manual
Table Of Contents
- Product Manual
- And Installation Guide
- Introduction
- Hardware Description
- Backhaul / Point-to-point Architecture
- Multipoint Architecture
- Repeater Architecture
- Mesh Architecture
- System Requirements
- Hardware Installation
- Installing and Visually Aligning Outdoor Units
- Software Configuration
- Getting Started
- Logging into the WirelessGRID NMS
- Current Settings
- Wired Network Settings
- Radio Network Settings
- WirelessGRID Bridge List
- WirelessGRID System Setup Tab
- Network Settings Tab
- Radio Settings Tab
- Admin Setup Tab
- Security Tab – Data Encryption
- WirelessGRID Authentication
- Data Encryption
- Encryption Key Manager
- Security Server (RADIUS) Settings
- Active Bridge Status Tab
- Remote Bridge (SU Station) Statistics Tab
- Firmware Update Tab
- Help Tab
- Antenna alignment and link monitoring tool
- Using the real-time signal strength monitor for antenna alignment
- Antenna Adjustment Using the real-time Signal Strength Monitor
- Specifications
- _
- _
- 4.940-4.990 GHz Public Safety Band (FCC Part 70, licensed Intl.)Non-overlapping Channels: 8 x 5 MHz, 4 x 10 MHz, 2 x 20 MHz, 1 x 40 MHz
- 5.25-5.35 GHz license-exempt (FCC, Industry Canada, Mexico)Non-overlapping Channels: 19 x 5 MHz, 9 x 10 MHz, 4 x 20 MHz, 2 x 40 MHz
- 5.47-5.72 GHz license-exempt (ETSI, FCC, ITU) with TPC and DFSNon-overlapping Channels: 44 x 5 MHz, 22 x 10 MHz, 11 x 20 MHz, 5 x 40 MHz
- 5.725-5.850 GHz licence exempt UNII & ISM Bands (ETSI, FCC, MII) Non-overlapping Channels: ISM, UNII: 25 x 5 MHz, 12 x 10 MHz, 5 x 20 MHz, 2 x 40 MHz
- Orthogonal Frequency Division Multiplexing (OFDM)
- 802.3, 802.11i draft, 802.11a hardware with proprietary bridging extensions
- Radio output power: Max: 21dBm (Set to local regulatory requirements to comply with transmit, conducted and EIRP power limits)
- Data Rate: 1 to 108 Mbps
- Sensitivity: -73 to –91dBm
- Modulation: 64QAM, 16QAM, QPSK, BPSK
- Point to Multipoint, Point to Point, Repeater (See Ordering Guide)
- AI108-4958-BSU, AI108-4958-ON2 - Order a Sector, Omni, GRID, or Panel AI108-4958-SU and -1: Flat Panel Directional AntennaAI108-4958-0-xxx: 23 dBi integrated or 28 dBi external directional antenna. External antennas may be used with local regulatory app
- Up to 7.5 miles (12 km) with built-in 23 dBi panel antennasUp to 30 miles (48.27 km) with max radio output power and optional external 34.5 dBi antennas
- Up to 30 miles (48.27 km) - N-type version (AI108-4958-ON-xxx) with max radio output power and optional external 34.5 dBi antennas
- _
- _
- Ordering Information
- WirelessGRID Worldwide Frequency Channel Plan
- Appendix A – Bench Test Procedure
- _
- Step 1. Setup a wired Ethernet network between test stations
- Step 2. Setup wired Ethernet network connections to bridges
- Step 3. Setup bridge software configuration for bridge
- Step 4. Test network connectivity across a WirelessGRID link
- Step 4a. Check throughput of WirelessGRID link (optional)
- Step 5. Running the real-time Signal Strength Monitor
- Step 6. Field deployment of WirelessGRID bridges
- Appendix B. Multi-point Bridge Configuration Log
- Appendix C: Weatherproofing RF Cable Connections
- How to Get Help
Airaya – Fast and affordable outdoor wireless bridges
Limited Warranty
AIRAYA Corp.
Limited Warranty: AIRAYA warrants all of its products to be free of
manufacturing defects in workmanship and materials, under normal use
and service, for the applicable warranty term. All AIRAYA products carry a
standard 90-day limited warranty from the date of purchase from AIRAYA
or its Authorized Reseller. AIRAYA may, at its own discretion, repair or
replace any product not operating as warranted with a similar or
functionally equivalent product during the applicable warranty term.
The standard limited warranty can be upgraded to a one-year warranty by
registering new products within 30 days of purchase from AIRAYA or its
Authorized Reseller. Registration can be accomplished online via the
AIRAYA web site. Failure to register will not affect the standard limited
warranty. The one-year warranty covers a product during the Life of that
Product, which is defined as the period of time during which the product is
an ‘Active’ AIRAYA product. A product is considered to be ‘Active’ while it
is listed on the current AIRAYA price list. As new technologies emerge,
older technologies become obsolete and AIRAYA will, at its discretion,
replace an older product in its product line with one that incorporates
these newer technologies. At that point, the obsolete product is
discontinued and is no longer an ‘Active’ AIRAYA product.
All products that are replaced become the property of AIRAYA.
Replacement products may be either new or reconditioned. Any replaced
or repaired product carries either a 30-day limited warranty or the
remainder of the initial warranty, whichever is longer. AIRAYA is not
responsible for any custom software or firmware, configuration
information, or memory data of Customer contained in, stored on, or
integrated with any products returned to AIRAYA pursuant to any
warranty. Products returned to AIRAYA should have any customer-installed
accessory or add-on components removed prior to returning the product
for replacement. AIRAYA is not responsible for these items if they are
returned with the product.
Customers must contact AIRAYA for a Return Material Authorization (RMA)
number prior to returning any product to AIRAYA. Proof of purchase may
be required. Any product returned to AIRAYA without a valid RMA number
clearly marked on the outside of the package will be returned to customer
at customer’s expense. Customers are responsible for all shipping charges
from their facility to AIRAYA. AIRAYA is responsible for return shipping
charges from AIRAYA to the customer.
- 3 -