Disconnect the power cord while filling the water. As per the provision in your model, pour water through water inlet door. You may also add ice cubes for faster cooling. Water can be poured up to the highest point (or MAX) of the water level indicator. You may keep a small container below over flow hole, to avoid spillage of water on your floor/carpet. For longer life of pump, always operate it with sufficient water in the tank.
POWER (ON/OFF) [ ]: Press the button to switch on/off the cooler. Icon will glow with RED colour at ON position and RED colour (Blinking) at OFF position COOL [ ]: Press the button to switch ON/OFF the pump. Cool Icon will glow when switched On. The Pump will start only when sufficient water is in the tank, indicated by water icon glowing. Low water level will be indicated by a buzzer for 5 seconds and water icon will start blinking . FAN [ ]: When started, the fan icon will glow.
Supplier’s Declaration of Conformity a. This device complies with part 15 of the FCC rules. b. Responsible supplier listed as per SDoC: Bonaire USA LLC. Contact 800-939-2983 or www.bonaire-usa.