User Manual

1. Inspect your bed before each use.
2. Keep your bed away from any sharp or protruding objects. Large cuts, tears or snags
may not be repairable and will not be covered by your warranty.
3. A repair patch kit has been included in case of incidental damage to your bed.
Please follow repair instructions carefully.
4. When not in use store bed in a clean, dry place out of extreme temperatures.
CLEANING
DO NOT SUBMERGE MATTRESS IN WATER! For spot cleaning, use a clean damp cloth to wipe the
surface of the mattress. Apply a clear liquid dish detergent without dye if necessary. Wet stained
area thoroughly; gently massage stained area with detergent. Blot the area to remove staining
substance. Rinse thoroughly and blot dry. Allow your bed to air dry completely after cleaning and
before storing.
IN CASE OF AIR LEAKAGE
Please check the following if there is an air leak.
1. Make sure valves are tightened to ensure leakage is not from loose valves.
A repair patch kit has been included for minor repairs. This patch kit includes everything
needed to make a repair.
REPAIRING AN AIR LEAK
1. Wipe bed with mild soap water over area to find possible air leak.
DO NOT SUBMERGE MATTRESS IN WATER! If there is a leak bubbles will form
around leakage area.
2. Follow cleaning instructions for leak area.
3. Use included patch kit to cut a suitable sized patch for leak. Make sure to round the
edges of repair patch to avoid peeling.
4. Apply glue to patch area and around leakage area.
5. Press patch firmly over the puncture area.
6. Wait 24 hours before inflating.
To prevent patch from peeling while drying....
It is recommended to tape down patch edges with a light adhesive tape.
Upon complete deflation, lay bed on flat surface with sleeping surface facing upwards and fold
according to the steps below.
Pump Side
*Bag may vary from illustration
FOLDING INSTRUCTIONS CARE AND MAINTENANCE
ADDITIONAL INFORMATION
4 5
1 2
3 4
5 6
7 8