Instructions / Assembly

Inflating the unit
Step 1. Plug the inflatable unit (A) into a receptacle or other
outlet device. The unit begins to inflate and remains
inflated until you unplug the unit.
Step 2. Once fully-inflated, clip the tethers (D) to each of the
loops on the side of the inflatable unit (A).
Step 3. Insert the tether stakes (C) into the ground and attach
the tethers (D).
NOTE: To deflate, unplug the unit. For faster deflation, unzip
the zipper on the unit after you unplug it.
For indoor and outdoor use.
120 V 60 Hz.
Replacing the fuse
CAUTION:
Risk o f F ire: Replace only with same
size and type of fuse.
CAUTION:
Risk of Fire: Do not replace the
attachment plug. Contains a safety device (fuse) that should
not be removed. Discard product if attachment plug is
damaged.
Step 1. Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on the cord.
Step 2. Open fuse cover. Slide open the fuse access cover
on top of the attachment plug towards blades. (See
illustration)
Step 3. Remove fuse carefully.
Step 4. Replace fuse only with 5 Amp Max, 125 Volt (provided
with product).
Step 5. Close the fuse cover. Slide closed the fuse access
cover on top of the attachment plug.
Replacing the bulb
CAUTION:
To reduce the risk of overheating,
replace burned-out bulbs promptly. Only use C7, 7-Watt
Max Candelabra-base 120 Volt UL-Classified bulbs (one is
provided).
C AUTION:
Unplug the unit and allow the bulb to
completely cool before you replace the bulb. Do not touch the
bulb when the power is On. The bulb is extremely hot.
Replacing the bulb (continued)
Step 1. Grasp the plug and remove it from the receptacle. Do
not unplug by pulling on the cord.
Step 2. Open the zipper on the inflatable unit.
Step 3. Open the protective bulb cover carefully by pressing down
on the two locking side tabs simultaneously.
Step 4. Remove the bulb from the socket and replace.
Step 5. Do not over-tighten the lamp as this may damage the
lamp or lamp holder.
a. Wipe the unit with a damp cloth and allow the unit
to dry
before storing. If necessary, you can use a mild detergent.
b. When the product is placed on a live tree, the tree should
be well maintained and fresh. Do not place on live trees in
which the needles are brown or break off easily. Keep the
tree holder filled with water.
c. If the product is placed on a tree, the tree should be well
secured and stable.
d. Before using and reusing, inspect the product carefully.
Discard any products that have cut, damaged or frayed wire
insulation cords, cracks, lamp holders or enclosures, loose
connections, or exposed copper wire.
e. When storing the product, carefully remove the product
from wherever it is placed, including trees, branches, or
bushes, to avoid any undue strain or stress on the product
conductors, connections and wires.
f. When not in use, store neatly in a cool, dry location protected
from sunlight.
Problem: The unit is not inflating.
a. Ensure that the unit is plugged in.
b. Check for and remove any debris from the motor.
c. Ensure that the zipper on the unit is completely closed.
d. If the outdoor temperature is below 14° F (-10° C), the motor
does not work until the outdoor temperature increases.
Problem: The unit is torn.
a. You can hand sew tears with any type of thread or use clear
packing tape to cover the tear.
Problem: The unit deflates after unplug.
a. The unit will not stay inflated unless it is plugged in and the
fan is blowing air.
A
D
C
Operation Care and Cleaning
Troubleshooting
MADE IN CHINA
PRINTED IN CHINA
DISTRIBUTED BY:
HOME DEPOT
2455 PACES FERRY RD., N.W.
ATLANTA, GA 30339
FOR ASSISTANCE, CALL:
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
Model #:
23623 26431 55731
SKU #:
1000006825 1000006828 1000050118