Operation Manual

Getting started
20
Q Charge the battery
1. Connect the lead from the charger
to the bottom of your radio.
2. Connect the charger to an AC wall
outlet. The battery indicator bar
starts to scroll. Charging is briefly
displayed if the radio is switched on.
You can use the radio while
charging.
If the battery is completely empty, it
may take a few minutes before the charging indication appears
on the display, or any calls can be made.
3. The battery is fully charged when the battery indicator bar stops
scrolling, and Battery full is briefly displayed if the radio is
switched on.
If Not charging is displayed, charging has been suspended. Wait for
a while, disconnect the charger, plug it in again, and retry. If
charging still fails, contact your dealer.
Note: Never charge the THR880i Ex inside an Ex area. For more
information, see the THR880i Ex Safety Instructions leaflet.
Q Switch the radio on and off
1. Press and hold to switch the radio on and off. If the Access
level of the user is Extended, switching the radio off returns the
level to Normal. See Security settings on page 98.
2. If the radio asks for a phone code, enter the four-digit phone code
(displayed as ****), and press
OK .
3. If the radio asks for a security code, enter the five-digit security
code (displayed as *****), and press
OK .
For more information, see Access codes on page 14.
Your radio has an external antenna.
THR880i_Rel6_en_print.book Page 20 Jeudi, 20. novembre 2008 2:13 14