Operation Manual

Group calls
41
Switch group calls on and off
1. Select Menu → Talk groups → Group settings → Group calls.
2. To switch group calls on, scroll to On, and press
OK . To switch
group calls off, scroll to Off, and press
OK .
You can call or receive calls from a talk group if it is a selected or a
scanned group and if it is available. These groups have their own
indicators in the group list; see Edit group folders on page 46.
If you do not want to receive calls from talk groups, switch group
calls off. If you do not want to listen to group calls, deactivate the
loudspeaker and earpiece by pressing and holding .
Select a folder
To select a folder whose talk groups you want to be available, press
in the idle mode to access the list of folders. Enter the first
characters of the folder name or scroll to the desired folder, and
press
Select .
To view the list of talk groups that are included in the selected folder,
press in the idle mode.
When you change the folder, the new selected group will be the
group that has the same index number as the latest selected group
in the previous folder. If the new folder has less groups than the
previous folder and the group index does not exist, the last group in
the new folder is selected. However, if the home group had been set
as the selected group with the back key or the latest selected group
was set by the network, the selected group does not change when
you change the folder.
Select a talk group
Turn the group selector until you reach the desired group. Wait until
Group selected is displayed and the radio plays a short tone.
THR880i_Rel6_en_print.book Page 41 Jeudi, 20. novembre 2008 2:13 14