Operation Manual

Positioning
66
• Send as message — to send the waypoint name, the coordinates,
and the comment as a text message.
• Edit name — to edit the name of the waypoint.
• Edit note — to edit the comment of the waypoint.
• Go to waypoint — to open a compass style application. See
Waypoint guidance on page 66.
• Add waypoint — to add a new waypoint manually. If waypoints
already exist in the waypoint list, press
Select and enter the
desired coordinates. If no previous waypoints exist, press
Add
and enter the desired coordinates. Before you add the new
waypoint, the display shows either the current coordinates, the
coordinates of the previous calculated position, or the default
value.
• Go to idle mode — to display position information in idle mode
display. See Waypoint information in idle mode on page 67.
• Memory status — to see how many waypoints can still be saved in
the memory, and how many waypoints are currently saved.
To view the waypoint information, select the desired waypoint. The
first display contains the geographical coordinates and an estimate
of the accuracy of the coordinates. The second display contains the
date and time of the measurement, and the third display contains the
comment, if saved with the waypoint. Use and to scroll
between the displays. Press
Options to send the waypoint as a text
message or edit the name or comment of the waypoint.
Waypoint guidance
Start the waypoint guidance application outdoors. If started indoors,
the GPS receiver may not receive information from the satellites,
and the correct coordinates cannot be displayed.
You can use the coordinates of a saved waypoint to find the target.
Scroll to the waypoint in the list, and select
Go to . The waypoint
guidance application opens.
THR880i_Rel6_en_print.book Page 66 Jeudi, 20. novembre 2008 2:13 14