Operation Manual

Menu functions
93
To activate a profile, press quickly in the idle mode, and select
the desired profile.
Customise profiles
1. Select Menu → Settings → Profiles.
2. Scroll to the desired profile, and select
Options → Personalise.
3. Select from the following settings: Incoming call alert, Ringing
tone for two-way phone calls, Push-to-talk ringing tone for one-
way phone calls, Ringing volume, Message alert tone, Status
message alert tone, Flash message alert tone, Keypad tones,
Warning tones, Audio setting for setting the active speaker and
microphone, Alert for for setting the radio to ring only for calls
from a selected caller group (see Caller groups on page 78),
Voice feedback, Lights, and Light indicator.
Note that even if Top microphone or External speaker is selected
in Audio setting, to improve the voice quality, the bottom
microphone is used in two-way calls when the loudspeaker or
external speaker is active.
Call settings
Anykey answer
When this function is activated, you can answer a phone call by
briefly pressing any keypad key, except for , , , and
. Select
Menu → Settings → Call settings → Anykey answer → On
or Off.
Summary after call
When this function is activated, the radio briefly displays the
approximate duration of the last two-way phone call. Select
Menu → Settings → Call settings → Summary after call → On or Off.
Note: The actual invoice for calls and services from your service
provider may vary, depending upon network features, rounding-off
for billing, taxes and so forth.
THR880i_Rel6_en_print.book Page 93 Jeudi, 20. novembre 2008 2:13 14