Operation Manual

Menu functions
97
Enhancement settings
1. Select Menu → Settings → Enhancement settings.
2. Select Active holder, Headset, Monophone, or Handsfree, and
select one of the following:
• Default profile — Select the profile you want to have activated
with the selected enhancement.
• Automatic answer — Select On to set the radio to automatically
answer an incoming call after five seconds. If the Incoming
call alert is set to Beep once or Off, automatic answer is not
used.
• Alerts — Select Headset to only have the headset play alert
tones, or Phone to have the headset and radio play alert
tones. This option is available only when Headset is selected.
To only have the monophone play alert tones, select
Monophone. This option is available only when the
Monophone profile is selected.
• Duplex call settings (monophone only) — Select Monophone to
route the audio only to the monophone. To route the audio
back to the radio, select Phone.
Modem settings
You can connect your radio with a data cable to a compatible PC,
and use it as a modem to enable connectivity from your PC to a data
network (network service). To establish a connection to the data
network, you must activate the access point you want to use for the
connection. For details on the access point, contact your network
operator or service provider.
1. Select
Menu → Settings → Modem settings.
2. To activate an access point, select Active access point. Scroll to
the desired access point, and press
Activate .
To change the access point settings, select Edit active access
point. To change the alias you are using for the access point,
THR880i_Rel6_en_print.book Page 97 Jeudi, 20. novembre 2008 2:13 14