Use and Care Guide

4
NOTES ON LOCATION
:
In order to get the most effective use from your humidifier, it is important to position
the unit where the most humidity is needed or where the moist air will be circulated
throughout the house such as near a cold air return. If the unit is positioned close to a
window, condensation may form on the window pane. If this occurs the unit should be
repositioned in another location.
Do NOT position the unit directly in front of a hot air duct or radiator. Do NOT place on
soft carpet.
Due to release of cool, moist air from the humidifier, it is best to direct air away from
thermostat and hot air registers. Position humidifier next to an inside wall on a level
place at least 4 inches away from the wall or curtains.
ASSEMBLY
1) Unpack humidifier from carton.
2) Remove all packaging material from humidifier.
Replacement Parts Available
For Purchase
Description
Part Number
Water bottles
1B71663
Bottle caps
1B71664
Front Grille
1B71665
Back Grille
1B71666
Bottle release latch
1B72089
Wick grille clip
1B71877
Wicks (2)
1040
Manual (not shown)
1B73043
To order parts or accessories please call 1-800-
547-3888. Please have humidifier serial number
when you call.
WATER FILL
CAUTION: Before filling, ensure unit is turned OFF.
1) Remove the water bottle by pressing down on the
latch on top of the bottle.
2) Locate the valve stem mechanism on the bottom of
the bottle and inspect to ensure it is not damaged
in any way.
CAUTION: The valve supplies a regulated amount of
water to the channel and wick. DO NOT attempt to
increase water flow by modifying the valve or adding
additional holes to the bottle. Doing so voids your
warranty and may cause water damage to your home.
NOTE: Do not fill bottle with warm water, as this might
damage the unit. When filling, be careful not to overfill.
Always leave a little air space at the top.