Specifications

Coast
to Coast
CARAV
AN & LEISURE
1
SECTION
1
SECTION
031
CANOPY LIFT MECHANISM 1200MM
250-00530
A flat ‘scissor’ style canopy lifter
which raises the roof on a pop-
top or campervan. It is made of a
steel track on the bottom & top
sections, as well as two steel
lengths that form an ‘X’ & pivot in
the centre.
• Width: 1200mm
• Lift Height: 990mm
• Weight Rating: 35kg
BUILDING MATERIALS
CANOPY LIFT MECHANISM (TUBULAR)
CANOPY LIFT MECHANISMS (FLAT)
250-00520
A tubular ‘scissor’ style canopy
lifter which raises the roof on a
pop-top or campervan. It is made
of a steel track on the bottom
& top sections, as well as two
tubular steel lengths that form an
‘X’ & pivot in the centre.
• Width: 900mm
• Lift Height: 685mm
250-00150
Cupboard Door Strut 6 1/2”
(16.5cm) Brass Finish
250-00500
Canopy Lift Mechanism Standard
Tension Spring
• Width: 900mm
• Lift Height: 685mm
• Weight Rating: 40kg
250-00160
Cupboard Door Strut 6 1/2”
(16.5cm) Colonial English Finish
250-00510
Canopy Lift Mechanism Standard
Tension Spring
• Width: 700mm
• Lift Height: 560mm
• Weight Rating: 35kg
A flat ‘scissor’ style canopy lifter which raises the roof on a
pop-top or campervan. They are made of a steel track on the
bottom & top sections, as well as two flat steel lengths that
form an ‘X’ & pivot in the centre. Available in two lengths.
CLOSET ROD GOLD (8FT LENGTHS)
CUPBOARD DOOR STRUTS
250-00120
Used inside wardrobes, these
closet rods are made from
anodized aluminium so it won’t
rust. It comes with predrilled
holes for easy installation.
These spring-loaded door struts offer strong support for
overhead & under bench cupboards whilst in the open
position. Featuring a flat swivel bracket on one end.
Available in two style finishes.
LEAKING:
• On vinyl canopies, side hems & poly cords are stitched with a
sewing machine.
• The stitching may allow water to seep through – this is
normal & not a warranty defect.
• In this instance, treat the seams with a seam sealer.
ARM CARE:
• Always keep this clean to allow the arms & braces to
operate smoothly.
• Periodically wash out the arm channels with a hose to keep
them clean & eliminate dirt & debris.
• Once the arms have been cleaned & dried completely, you
can spray the joints with a dry silicone lubricant.