Specifications

Coast
to Coast
CARAV
AN & LEISURE
1
SECTION
ROOF CLAMP FOR POP TOPS
TRULINE ALUMINIUM WHITE (5MT)
MOULD INSERT FOR SINGLE SAILTRACK
3 STAGE CAMPER LIFTER WITHOUT WINGS
PUSH RODS 66”
PLASTIC BED SADDLES
MOULD INSERT WHITE FOR TRULINE ALUMINIUM
MOULD INSERT FOR TRULINE ALUMINIUM (BLACK)
250-00550
These roof clamps secure the roof
of the pop-top or campervan in the
lowered position whilst in travel.
Comes as a 2-part kit, a clamp &
small bracket that gets screwed to the
roof. Kits are sold separately. (white)
250-00560
J hook for white pop-top clamp
(white)
250-00600
Roof Clamp for Pop Top (Silver)
250-00610
J Hook for Silver Pop Top Clamp
250-00620
Roof Clamp for Pop Top (Silver) -
allows you to lock your pop top roof
in the closed position by using a
padlock. (Padlocks are not included).
250-02000
Also known as Millard Series 80
Aluminium. This is a powder coated
aluminium edging used to seal the
joins of the exterior of your RV e.g.
where the side wall meets the roof
or the rear panel. (Has a 25mm lip to
cover the roof or front/ rear).
250-02116
Used mostly in the manufacturing
process to cover external screw points
and give an overall neater appearance.
Available with an 18mm width.
250-03000
Once you have successfully
opened your Jayco camper trailer
these lifters act as a support to
keep your camper trailer in the
‘open’ position.
250-03010
These strong, flexible pushrods
guide the roof of your camper trailer
upwards as you wind the crank. They
help to push the lifter arm up.
250-03020
Plastic Bed Saddle To
Suit Camper
250-03022
Plastic Bed Saddle To Suit
Expanda
250-02118
Fits inside the Truline Aluminium
to cover up any unsightly screws.
250-02120
Fits inside the Truline Aluminium
to cover up any unsightly screws.
(Sold per meter.)
BUILDING MATERIALS
032
Coast
to Coast
CARAV
AN & LEISURE