Specifications

2
SECTION
2
SECTION
Coast
to Coast
CARAV
AN & LEISURE
BRAKE CONTROLLERS
350-01232
The Voyager has recessed controls which protect the gain
& level settings from accidental readjustment. Its internal
sensor measures the amount of deceleration & sends the
required amount of power to the trailer brakes. Its circuitry
ensures minimum interference with other electronic systems
such as ABS & cruise control.
The Voyager has the traditional
4-wire hook up & comes
with a U-shaped bracket for
permanent installation. The
LED display shows a complete
circuit when green & as power
(whether manual or
automatic) is applied,
it will change colour.
Suitable for single &
double axle trailers.
350-01238
Suitable for 1 - 4 axle trailers, the Prodigy P2 is a proportional
style brake controller. It is designed to work in with electronic-
over-hydraulic brake systems and has numerous mounting
options, incorporating 360 degree vertical rotation. The Prodigy
P2 adjusts itself to the terrain as you
drive, making it especially handy when
reversing into tough spots. It works
proportionally in reverse, with the ability
to disable itself when it is not needed.
The “boost” feature gives users the
ability to apply more braking power
when towing heavier trailers/ horse
floats, thus also giving you more
control. When not being used, the
Prodigy P2 can be easily disconnected
allowing for storage elsewhere.
Weight: 590Gr
Dimensions: 76H x 114W x 267L (mm)
TEKONSHA #9030 VOYAGER 12V BRAKE CONTROL
TEKONSHA PRODIGY P2 12V BRAKE CONTROL
042
350-01244
This high performance, Australian designed & made electronic
brake controller has a digital display for accurate setup, along
with open circuit & overload
indication. Setup of this compact
device with made easy with only
2 push button switches.
Nominal Operating Voltage:
12VDC
No Current Load:30mA
Dimensions:
40H x 80W x 125D (mm)
Weight: 270gr
350-01240
The P3 is an electric trailer brake control suitable for single,
double, triple & quadruple axle trailers. It allows you to select
between electric & electric over hydraulic brakes. The digital
display allows for easy interpretation of the diagnostics such as
output current, battery/ brake & output voltage. A flashing red
warning alerts users to “No Trailer Brake” situations & you’re
able to customise the LCD display, changing the language,
colour & contrast settings.
All controls are easily
accessed on the front of
the unit which can be
easily disconnected &
stored when not in use –
it even comes with
a padded storage
pouch.
GSL 12V ELECTRONIC BRAKE CONTROLLER
TEKONSHA P3 DIGITAL BRAKE CONTROLLER