Specifications

2
SECTION
Coast
to Coast
CARAV
AN & LEISURE
2
SECTION
350-01246
The 24V EBC has all the same features as the 12V EBC but it
operates at a higher voltage. This
makes it better suited to vehicles
such as trucks or imported RV’s
that require the higher voltage,
with a 12V output to your trailer’s
electric brakes.
Nominal Operating Voltage:
24VDC
No Current Load: 30mA
Dimensions:
40H x 80W x 125D (mm)
Weight: 270gr
350-01252
A lockable breakaway system that is suitable for single &
double axle trailers. Installation is quick & easy because there
is no need for cutting;
you’re able to mount it
onto a pole or the frame of
the trailer. Its heavy duty
plastic case protects the 5
Amp/Hr battery & charger
from the elements.
350-01250
For trailers over 2000kg (Gross Trailer Mass) it is a requirement
that a mechanism is in place in the event that if the trailer &
tow vehicle separate accidentally, the trailer brakes are applied
at full power for at least 15mins. One way to combat this is
with a breakaway switch
which sets the trailer
brakes in case the trailer
breaks away, however
this is not to be used as a
parking brake. It is nylon
with a weldable tab.
GSL 24V ELECTRONIC BRAKE CONTROLLER
TEKONSHA BREAKAWAY SWITCH WITH ABCD
CHARGER
TEKONSHA BREAKAWAY SWITCH (2010)
BRAKE CONTROLLERS
043
350-01260
Kit includes a 5Amp battery with
lockable case & nylon breakaway
switch & only weighs 2.5kg.
Dimensions:
15.9L x 16.2W x 21.6H (cm)
350-01274
To be used in
conjunction with the
Breaksafe 6000 (part
#350-01280 below),
this remote monitor
is fitted to the tow
vehicle and checks the charge condition of the Breaksafe
battery each time the brakes are applied. If the battery is low,
a red light will be visible on the front panel of the monitor and
a buzzer will sound.
Dimensions (mm): 63W x 22H x 49L
TEKONSHA SHUR-SET III BREAKAWAY KIT
BREAKSAFE REMOTE BATTERY MONITOR
350-01280
The Breaksafe 6000 is suitable for use in caravans, trailers &
horse floats. It is compact & easy to install &, has easy access
to the battery compartment for servicing. Its lead acid battery
as well as the internal circuit board case is enclosed offering
better resistance to water. Suits all electric brakes & is
charged using your vehicle’s battery.
It is a requirement by law, for trailers registered in NSW
to have a battery monitor on board. Please purchase
part # 350-01274 (Breaksafe Remote Battery Monitor) in
conjunction
with the
Breakaway
System 6000.
BREAKSAFE BREAKAWAY SYSTEM 6000