Installation Manual

PureFlow AirDog®
AirDog® FP-100 & FP-150 1998.5-2004 Cummins Diesel
Section 7 Wiring Harness
22
AirDog
®
Wiring Harness Install
WIRING DIAGRAM
*CAUTION: If the OPTIONAL Low Pressure Indicator Light is not used, be sure to insulate the
two (2) #10 Indicator Light connectors and pressure sensor lead to prevent accidental contact.
*The light kit is sold separately and is not included in this kit.
Secure the Relay and Fuse Holder to the Vehicle
7-1. Secure the relay and fuse holder to the vehicle. Be sure to rout the wires away from any
moving parts. The relay is illustrated below in figure 52. The fuse holder mounting is the
same concept.
DEUTSCH ECM
CONNECTOR
INDICATOR
LIGHT LEADS*
AirDog®
MOTOR LEAD
PRESSURE
SWITCH
LEAD*
BATTERY
NEGATIVE LEAD
BATTERY
POSITIVE LEAD
FUSE HOLDER
WITH 20A FUSE
RELAY
Figure 51
Figure 52