Installation Manual

PureFlow AirDog®
AirDog® FP-100 & FP-150 1998.5-2004 Cummins Diesel
3
OVERVIEW
Welcome to PureFlow
®
AirDog
®
Fuel Air Separation System for the Diesel Engine!
The AirDog
®
Fuel Air Separation system is a Premium replacement lift pump and filtration
system for the 1998.5-2002 Dodge Cummins 24 Valve 5.9L diesel engine with the VP-44 pump
and the 2003-2004 Dodge Cummins 24V 5.9L with the CP3 pump. A complete installation kit is
included.
The AirDog
®
delivers clean fuel to the engine free of virtually all air/vapor and at a positive flow.
Thus, allowing the engine “test cell” performance and efficiency, while in “real world” use.
The AirDog
®
FP-100 is recommended for stock and slightly modified 5.9L Cummins Diesels.
The AirDog
®
FP-150 is recommended for highly modified 5.9L Cummins Diesels.
PureFlow® products are manufactured with a personal touch,
unsurpassed attention to detail
And
The most stringent quality control!
TYPICAL INSTALLATION LAYOUT
Figure 1
The AirDog
®
draws fuel from the fuel tank at constant flow, removing water, particulates,
entrained air and vapor. A regulated pressurized flow is maintained to meet the engine’s
varying fuel demands. The separated air/vapor is returned by the AirDog
®
to the fuel tank.
NOTE: The pictures used in this manual are for example only and may not be exactly the same
as your truck.