User Manual

10
INSTALLING THE FRRP-100 CONTINUED
6. Assemble one end of the hose (Reference the fuel line assembly section) using fuel line
end FQC1290 and plug it into the WAP102 fitting installed in the filter canister “inlet”
port in the previous step. A “click” will be heard once the fitting is properly connected.
7. Run the fuel line to the port in the FRRP labeled “Out” and cut the fuel line to length.
Press in fuel line end FQC1290 per the fuel line assembly section and install it on the
previously installed 08J2044-3/4UNF fitting. A “click” will be heard when properly
installed.
8. Connect the factory power lead to the lead from the motor of the FRRP-100.
FQC1290
HS02
Figure 8
FQC1290
HS02
Figure 9