Specification

ATTACHING THE FAN BLADES

Step 1. Attach the fan blades to the blade holders using the screws and ﬁber washers provided, tighten screws and ﬁber

washers securely. Repeat process with other blades. (Fig. 14)

Step 2. Align motor holes to blade holders and secure with screws and lock washers provided, tighten screws securely.

Repeat process with other blades. (Fig. 15)

FIG. 16

INSTALLING THE MOUNTING PLATE

FIG. 14

FAN BLADE

BLADE HOLDERS

SCREWS AND FIBER WASHERS

FIG. 15

Step 1. Remove 1 of 3 screws from the mounting ring and loosen the other 2 screws. (Do not remove)

Step 2. Place the key holes from the mounting plate over the 2 screws previously loosened from the mounting ring, turn

mounting plate until it locks in place at the narrow section of the key holes. Secure by tightening the 2 screws previously

loosened and the one previously removed. (Fig. 16)

MOTOR

SCREWS

BLADE

HOLDER

ASSEMBLY

MOUNTING

PLATE

SCREWS

MOUNTING RING