Owner manual

IT Cooling
LogiCool™ OnRak
IT Cooling
33
Technical, Installation and Maintenance Manual :6912497 V1.5.0 02_2013
Solenoid Valve
The solenoid valve can be installed in any position, vertical with coil upwards preferred.
Mass 1kG
a
b
c
f
g
l
s
105
85
106
71
46
28
42
CAUTION
The solenoid valve electrical connection must be a maximum of 3m away from the
customer terminal box. This is to ensure EMC Compatibility.
Coil Water Connections
Coil connections are brazed at Airedale. Full pressure testing to 20Barg is carried out
prior to unit despatch.
Water Temperature Sensor
The water temperature sensor is attached to the inlet water pipework with a copper strap.
It is factory fitted although if you are replacing the sensor ensure that it’s fixed securely.
Swivel pipework
connection to coil