Instructions / Assembly

WARNING:
To reduce the risk of personal injury, Do not bend the blade brackets when installing the brackets balancing the
blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.
WARNING:
To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked acceptable for fan
support and use mounting screws provided with the outlet box.
WARNING:
To reduce the risk of fire, or electric shock, do not use this fan with any solid-state speed control device.
CAUTION:
To reduce the risk of personal injury, use only the two steel screws ( and lock washers ) provided with the fan
for mounting to the outlet box.
CAUTION:
To reduce the risk of personal injury, install the primary mounting means and use only the hardware provided
with the fan.
Turn on the electric power
Fig.14.
Fig.9.
Fig.10.
Fig.8.
Tighten the blade holders
to the blades by using blade screws.
Secure blade holders to the motor
with motor screws.
FOR DOWNROD MOUNT & CEILING
MOUNT
Secure the canopy to the hanger
bracket with canopy screws.
Fig.13.
Secure the switch cover with the
switch plate screws.
Use pull chain to control the fan
speed.
Use reverse switch to change the
fan spin direction.
Pull Chain
Blue
Green ( Ground )
Fig.7.
FOR DOWNROD MOUNT & CEILING MOUNT
Make wires connection:
1). The motor white wire to the white wire from outlet box with a wire nut.
2). The motor black wire and blue wire to the black wire from outlet box with
a wire nut.
3). The ground wire from ceiling outlet box to the ground wire from the motor
with a wire nut.
*** After making the wire connections, the wires should be spread apart with the
grounded conductor and the equipment-grounding conductor on one side and
the underground conductor on the other side of the outlet box.
*** The splices after being made should be turned upward and pushed carefully
up into the outlet box.
PAGE: 2 / 3
Fig.11.
Fig.12.
Insert the motor wires through the
switch plate.Tighten switch plate to
fan using motor screws.
Connect the 2 terminals from motor
and the switch plate.
switch plate
Forward/Reverse
Switch
Buckle
Salient
Forward/Reverse
Switch