Instructions / Assembly

PAGE: 2 / 3
Decorative Housing
Screw
Fig.7.
Fig.8.
Place the decorative housing over the motor
assembly and against the ceiling to match
with the holes in the perimeter of the mounting
plate. Secure the housing to the mounting plate
with the screws removed in Fig 2. Tighten these
four screws securely.
Fig.9.
Secure the blade holders to the motor
with motor screws.
Tighten blades to blade holders by
using blade screws and washers.
Blade Screw
Washer
Blade
Blade Holder
Fig.10-II.
Fig.11.
Make wire connections:
1.) Connect the motor white wire to the
light white wire by using a wire nut.
2.) Connect the motor blue wire to the
light black (or blue) wire by using a
wire nut.
Install the fan light set to the switch
box with the switch box srews.
Assembly with fan light ( Fan light included ):Steps 10-II to 13
Install the glass shades and secure
them with screws.
Fig.12.
Fig.10-I.
Make sure the lead wire of fan light in
switch box is completely sealed with a
wire nut.
Secure the switch box cover with the
switch box screws.
Assembly without fan light
060116
TM
Turn on the electrical power.
Fig.15.
Use the pull chain(-b) for the light to
t
urn
the li
gh
t on or
of
f.
Use the pull chain(-a) for the fan to chang
e
the fan speed to High, Medium,
L
ow or
o
f
f.
Use the reverse switch to reverse the
rotation of the fan.
Fig.14.
Fig.13.
Install the bulbs (not included). See
relamping label at socket area or
packaging for maximum allowed
wattage.
Pull Chain(-a)
Pull Chain(-b)
Reverse
Switch