Install Guide

3/18/03 Step 4: Installing the 802.11a Radio Card 6

Step 4: Installing the 802.11a Radio Card

• Take a moment to ensure that your ESD workspace is secure: wrist

strap, desktop mat, floormat and/or heel strap properly grounded.

Caution: Even if you are working at an ESD workspace, you can still

damage the 802.11a Radio Card. Make sure you pick up the 802.11a

Radio Card by the edges as shown in the following figure, and do not

touch the connector fingers.

Figure - Holding the 802.11 Radio Card by the Edges

• Remove the 802.11a Radio Card from its kit and position the card on

the edge of the Airespace AP case as shown in the previous figure.