Install Guide
3/18/03 Step 4: Installing the 802.11a Radio Card 9
• Carefully rotate the 802.11a Radio Card as shown in the following
figure.
• Make sure the RF cables are not pinched under the 802.11a Radio Card
(small arrow).
• Position the 802.11a Radio Card against its mating connector at a
shallow angle (large arrow).
• Gently press the 802.11a Radio Card all the way into its mating
connector until it bottoms out in the connector (large arrow).
Figure - Positioning the 802.11a Radio Card in the Airespace AP Case