Specifications

A10
3. Refill with the new adsorber material. After refilling, shake module to pack granules tightly before
replacing cover plate to make sure module is full. Remove the end cover plate and top-off any void in the
module.
4. Vacuum any excess carbon dust that occurs from settling during handling. After re-installing, stay clear of
the unit outlet area as some dust may be expelled when unit is first turned on. The unit should be test run
after each refilling operation.
OTHER SERVICE
Most other components of your Model V410 air cleaner require little or no routine servicing. Items such
as motor/blower, tubing, and gaskets should be checked twice a year under normal usage; more frequently
under severe 24-hour-per-day usage. Clean, repair, or replace parts as necessary. Replacement parts are
available from your Airflow Systems distributor. The following section lists replacement parts for the Model
V410 unit.