Specifications

2008 Residential Appendices RA3-33
Appendix RA3 – Residential Field Verification and Diagnostic Test Protocols
weight-per-square-foot (or the minimum weight per cubic foot) consistent with the manufacturer's labeled
installed-design-density for the desired R-Value, and the number of inches required to achieve the
desired R-Value. The insulation installer shall also complete the applicable sections of the Installation
Certificate form and attach a bag label or a manufacturer's coverage chart for every insulation material
used.
RA3.5.10 Certificate Availability
The Insulatio
n Installation Certificate (CF-6R), with insulation material bag labels or coverage charts
attached), signed by the insulation installer, shall be available on the building site for each of the HERS
rater's verification inspections. Note: The HERS rater cannot verify compliance credit without these
completed forms.