Product manual

Model #RB3-065/035 4 R20140519
3. Packing List and Terminology
Your model #RB3-065/035 VERSABALL® gripper is shipped fully
assembled and ready to be installed. The gripper has four primary
parts as shown in Figure 1 (adapter plate, base, large head, small
head).
Figure 1
Four #10-24 x 1/2" cap screws attach the adapter plate to the base, and
four draw latches attach the base to the head. The draw latches can be
released to disengage the head (this is only necessary if the gripper head
needs changing or replacement). To reengage the head, ensure that the
flat plates of the base and head meet flush, then manipulate the draw
latches to secure the head.
Your model #RB3-065/035 VERSABALL® Gripper is also shipped
with tubing, push-to-connect fittings, and a diagnostic analog vacuum
gauge. Use of these accessories is described Sections 5 and 6.