Instruction Manual Instruction Manual Airfree® P1000 / Platinum 2000 / Onix 3000 Airfree® P1000 / Platinum 2000 / Onix 3000 1
Index Safety Instructions..........................................................................................................................................2 Applications....................................................................................................................................................3 What Airfree® Destroys...................................................................................................................................3 Airfree® and Mold.............
Always keep Airfree® in its vertical position as shown in the picture, otherwise the unit will be shut off until it goes back to the vertical position. In the event of a return for repair, make sure Airfree® is well protected preferably inside its original box to avoid further damage. To find the nearest Airfree® dealer visit: www.airfree.com Airfree® shall not be placed near flammable and toxic products. If the supply cord is damaged, it must be replaced by an authorized repair centre.
Airfree® and Mold Guide for Airfree® installation in mold contaminated rooms 1 - Install your Airfree® unit in accordance with the user manual 2 - Allow your unit to run for at least one week to achieve significant airborne mold spore reduction. 3 - Clean mold infected items and surfaces, since they are a continuous source of new spores. It is important to stress that Airfree® will not destroy or remove mold from an infected item or surface. Those surfaces must be cleaned manually.
Airfree® Description 1 1- Top Lid with Air outlets and Night Light 2- Light Intensity Touch Sensor 2 3 4 5 3- Side Shells 4- On/Off Led 5- Base 6- Air Inlets 7- Power Cord 6 8- Serial Number 7 8 It is possible to adjust the light intensity using the night light intensity touch sensor (2) located at the position indicated by the illustration above. The light does not intervene or has any relation with Airfree’s TSS™ patented sterilization core functioning.
How does Airfree® Work? Purified Air Cooling Chamber Cold and clean air is delivered to the environment without significant change in room temperature and humidity TSS™ Sterilizing Ceramic Core Inside the ceramic core 99.
6. Can I place Airfree® at the corridor to reach adjacent rooms? No. Airfree® will just reduce air pollution in the corridor’s area. 7. Can I place Airfree® in a closed room? Yes. Please remember such a room must have at least 330 ft³ (10 m³). 8. Can I change Airfree® from one room to another? Airfree® must always be plugged in the same room 24 hours a day. Airfree’s patented technology works gradually and cannot have its cycle interrupted.
20. Does Airfree® need filter replacement? No. 21 - Does Airfree® night light interfere with Airfree® sterilising function? No. The night light has an aesthetic effect and may simply be used as a night light in children or newborn bedrooms. 22 - Where do the microorganisms go after they are destroyed? All living microorganisms are basically composed by carbon, oxygen an nitrogen.
