User's Manual
AGN0912AR-01
802.11b/g MISO
BBGW Radio
Preliminary Product Details
External Memory Support
• SEEPROM
• SDRAM (optional)
Additional Hardware Features
• Hardware based Multicast address filtering
• Automatic RTS/CTS generation
• Independent AGC functions for up to 3 receive chains
• Enhanced Interference Avoidance
• Beacon Mode hardware support
• Programmable defer / detect thresholds
• Automatic transmit gain control compensates for gain.
Typical Power Consumption
• 808mW @54Mbps (10% Tx, 20% Rx, 20% Listen, 50% Sleep)
Operating Parameters
• Operating Voltage: 3.3V +/- .10V
• Operating Temperature Range: -10 to +85C
• Operating Humidity Range: 15% - 95%, non-condensing
AGN0912AR-01 Installation
The AGN0912AR-01 is designed specifically for Broadband Gateways and other similar Access Point
applications. The AGN0912AR-01 uses a miniPCI connector for insertion into an attaching system.
However, the AGN0912AR-01 does not conform to the miniPCI PCB size or power restrictions
.
Below is a “typical” AGN0912AR-01 module installation:
• Align the miniPCI connector on the AGN0912AR-01 with the miniPCI receptacle on the attaching
system, taking care to fit the notch in the bottom left of the radio module with the tab on the
miniPCI receptacle on the attaching system (see Figure 3).
• Firmly press the radio card towards the attaching system until the clips engage.
• Disseminating end-user documentation for the installation/removal of the AGN0912AR-01 is
expressly prohibited by regulatory statues.
Airgo Networks Inc. Page 7 of 10 May 2005
Airgo Networks Proprietary Information