User's Manual

Sample Deployment Scenarios
Installation and User Guide: Airgo Access Point 21
Figure 10: Example 3 Feature Decisions
The following table lists the tasks required to link to an external RADIUS server and add multiple
VLANs, and provides pointers to the detailed instructions in this guide.
Table 5: Example 3 Configuration Tasks
Task Explanation
Add authentication
servers and zones
1 Identify the RADIUS server for each authentication zone.
2 Select the authentication option for the SSID, with reference to the defined
authentication zone.
References: “Configuring SSID Parameters” on page 83 and “Configuring
Authentication Zones” on page 155
Set up VLANs 1 Choose the VLAN structure for the network.
2 Configure the VLANs.
Reference: “Configuring VLANs” on page 111
Add VLANs to the
service profiles
1 Define or modify service profiles to include VLAN selection.
2 Bind each profile to an SSID with an existing or new user group.
Reference: “Profile Table” on page 89 and “SSID Details” on page 87
Distribute configuration
updates
1 Make any configuration changes in the NM Portal AP.
2 Regenerate the default policy and redistribute to the enrolled AP(s).
Reference: “Working with Policies” on page 197
A0036A
Physical Network
One AP Multiple APs Wireless Backhaul
Network Management NM Portal
Default VLAN
Single SSID (default)
Default COS Mappings Custom COS Mappings
Default Service Profile Custom Service Profiles
Disabled (default) Enabled
Multiple SSIDs
Multiple VLANs
NMS PRO
User Authentication Built-In Security Portal External RADIUS Server
Security Modes WPA (default) Open WEP
VLAN
SSID
Service Profile
Guest Access
Quality of Service
(Class of Service - COS)