User's Manual

Sample Deployment Scenarios
Installation and User Guide: Airgo Access Point 23
Figure 12: Example 4 Feature Decisions
The following table lists the tasks required to configure guest access and provides pointers to the
detailed instructions in this guide.
Table 6: Example 4 Configuration Tasks
Task Explanation
Set up guest VLANs • Configure a VLAN for guest access.
Reference: “Configuring VLANs” on page 111
Create guest service
profile
• Add a guest service profile with the guest VLAN and desired COS and
open security.
Reference: “Profile Table” on page 89 and “SSID Details” on page 87
Configure landing page • Choose an internal or external landing page and assign guest password.
Reference: “Configuring Guest Access with VLANs” on page 173
Distribute configuration
updates
1 Make any configuration changes in the NM Portal AP.
2 Regenerate the default policy and redistribute to the enrolled AP(s).
Reference: “Working with Policies” on page 197
A0036A
Physical Network
One AP Multiple APs Wireless Backhaul
Network Management NM Portal
Default VLAN
Single SSID (default)
Default COS Mappings Custom COS Mappings
Default Service Profile Custom Service Profiles
Disabled (default) Enabled
Multiple SSIDs
Multiple VLANs
NMS PRO
User Authentication Built-In Security Portal External RADIUS Server
Security Modes WPA (default) Open WEP
VLAN
SSID
Service Profile
Guest Access
Quality of Service
(Class of Service - COS)