User's Manual

3 Installing the Access Point Using the Configuration Interfaces
34 Installation and User Guide: Airgo Access Point
factory default password is shipped with the AP on a paper insert. Use the password from the
insert to log in.
4 The system response at this point depends upon whether the AP has already been initialized.
a If the AP has been initialized, the Home feature panel opens. See “The Home Panel” on
page 40.
b If the AP has not been initialized, the QuickStart Welcome panel opens. Use the QuickStart
panels described in the next section to quickly configure the AP.
Using AP Quick Start to Initialize the Access Point
When accessing the web interface for the first time or after resetting the AP to factory defaults, the
Welcome panel of the AP Quick Start Wizard opens (Figure 18). From this panel, initialize the AP
in either of two roles:
• Normal Access Point
• Portal Access Point (NM Portal)
Figure 18: AP Quick Start Welcome Panel
Both roles allow the AP to function as an IEEE 802.11 wireless network node. As a portal AP, the
following additional functions are available:
• Configuration of the Airgo Networks wireless network using secure AP enrollment and policy-
based configuration of APs
• Authentication of wireless users via built-in RADIUS server and certificate-based identity
management system