User's Manual

D Alarms
282 Installation and User Guide: Airgo Access Point
D
escr
i
p
ti
on
This alarm is when an image distribution is completed.
U
sage
G
u
id
e
li
nes
Informational log
E
xamp
l
es
On DeviceId AP_00-0A-F5-00-01-77 , the Software image [0.7.0, build A.2286,
AGN1dev, Airgo Networks Inc., ] distribution request from portal[AP_00-0A-F5-
00-01-77 ] using the Distribution TaskId=000000 and with status=172.16.12.4, ,
0, 947304168, 947304183, invalid image file. completed at time[Tue Jan 6
21:32:18 1970 ]
S
ee
Al
so
<Image Download Failed, Image Download Succeeded>
Wireless: Radio enabled (BSS enabled)
Notification that an AP radio has been enabled
S
yntax
"Device ID %s radio %d is enabled, its operational state is %d operating on
%d"
D
escr
i
p
ti
on
This notification is generated when an AP radio (BSS) is enabled.
U
sage
G
u
id
e
li
nes
This indicates the successful start of a BSS and also provides the channel on which the AP
radio will be operating.
Alarm Severity
Severity Critical
Alarm Parameters
DeviceId The device ID of the Airgo AP
Radio Identifies radio by interface ID on the AP
Operational Mode This indicates the operational mode of the radio whether it is 802.11a,
802.11b, or 802.11g.
Channel ID This indicates the channel on which the AP is operating.
Alarm Severity
Severity Critical