User's Manual

Wireless: STA association failed
Installation and User Guide: Airgo Access Point 285
D
escr
i
p
ti
on
This is a notification generated when operating frequency is changed for an AP radio due to
either user triggers or events such as peridic DFS. The reason code can have a value of 0m,
indicating that the reason is unspecified. The new channel ID is also provided.
Reason Code Description
0 Triggered due to DFS
1 User triggered
U
sage
G
u
id
e
li
nes
Informational log
E
xamp
l
es
Frequency Changed for Device ID AP_00-0A-F5-00-01-B6 radio 4 channelId 64
CauseCode 0
S
ee
Al
so
Wireless: STA association failed
Notification that indicates the association failed for an 802.11 station
S
yntax
"Station association failed for DeviceId %s radio %d station MAC %s station
status %d CauseCode"
D
escr
i
p
ti
on
This is a notification generated when an association from an 802.11 station fails with the AP
radio. The reasons for the failure are encapsulated in the cause code parameter and are as
follows:
1 -
Invalid parameters received from station in association request
2 - Only stations are allowed to associate with this AP based on current configuration
3 - Only backhauls can be formed with this AP based on current configuration
4 - Maximum backhaul limit is reached based on the 'Max Trunks' configuration for AP admission
Alarm Parameters
DeviceId The device ID of the Airgo AP
Radio Radio interface ID on the AP
STA MAC Address MAC address of 802.11 station
STA status Association or reassociation
Cause Code Reason why station association failed
Alarm Severity
Severity Critical