User's Manual

D Alarms
286 Installation and User Guide: Airgo Access Point
criteria
5 - Maximum station limit is reached based on the 'Max Stations' configuration for SSID
6 - SSID received in association request does not match SSID in AP configuration. This can occur
more often when the AP is not broadcasting SSID in beacon (either due to SSID being surpressed or
multiple SSIDs being configured) and station is associating with an AP with a different SSID.
7 - Authentication and encryption requested by station does not match security policy of the AP
8 - Multi Vendor Station are not allowed to associate based on AP admission criteria
9 - 802.11b stations are not allowed to associate based on AP admission criteria
10 - Station is not allowed to associate and transferred to another AP Radio due to Load Balancing
11 - Station is not allowed to associate because node does not have network connectivity
U
sage
G
u
id
e
li
nes
The reason for the association failure can be used to determine any configuration issue in the
system that may be causing the association failures.
E
xamp
l
es
Station association failed for Device ID AP_00-0A-F5-00-01-B6 radio 4 station
MAC 00:0a:f5:00:3a:fe CauseCode 2
S
ee
Al
so
Wireless: STA associated
Notification that indicates the association and authentication was successful for an 802.11 station
S
yntax
"Station associated for DeviceId %s radio %d station MAC %s, Station status %d
userId %s station count %d"
Alarm Parameters
DeviceId The device ID of the Airgo AP
Radio Radio interface ID on the AP
STA MAC Address MAC address of 802.11 station
STA status Association or reassociation
User ID Identifies user by user name or MAC address
Station Count Current count of associated users with AP
Alarm Severity
Severity Critical