User's Manual

D Alarms
294 Installation and User Guide: Airgo Access Point
D
escr
i
p
ti
on
This notification is generated when a Bridge Portal (radio) authentication fails. The context of
the BP radio and the RADIUS server that rejected the BP radio are also provided. A BP
attempts authentication when a wireless backhaul is being established.
U
sage
G
u
id
e
li
nes
This indicates that a security portal has rejected a BP authentication attempt with this AP.
Usually it means that the BP is not enrolled in the same network as the AP. It may also mean
that the BP was just enrolled, and the enrollment database has not yet been synced across the
network to all security portals.
E
xamp
l
es
For device-id AP_00-0A-F5-00-01-89 , the RADIUS server 192.168.75.230:1812
from auth zone BldgOne rejected the node 00:0a:f5:00:06:22 on radio 0 with
device-id AP_00-0A-F5-00-01-89 and SSID NewYorkRm
S
ee
Al
so
Security: RADIUS server timeout
Notification that indicates the AP has determined that a RADIUS server has failed to respond
within the RADIUS timeout
S
yntax
"For device-id %s, the RADIUS server %s:%d from auth zone %s failed to respond
within %d seconds and %d attempts while authenticating STA %s on radio %d with
user-id %s and SSID %s"
Node The MAC address of the BP node
Radio Radio interface on the AP
Device ID The device ID of the BP node
SSID SSID on the AP to which the station has associated
Alarm Severity
Severity Critical
Alarm Parameters
DeviceId
The device ID of the
Airgo AP
RADIUS server The IP address of the RADIUS server
Port The port used to communicate with the RADIUS server.
Auth Zone The name of the Auth Zone on this AP of which this RADIUS server
is a member