User's Manual

Security: Management user login success
Installation and User Guide: Airgo Access Point 295
D
escr
i
p
ti
on
This notification is generated when the RADIUS server fails to respond within a certain
timeout period.
U
sage
G
u
id
e
li
nes
This indicates that the AP has determined that a RADIUS server has failed to respond within
the RADIUS timeout. This may mean that the RADIUS server is unreachable over the network,
or the shared secret with the RADIUS server is mis-configured on the AP. Usually, RADIUS
servers do not respond when clients attempt to communicate with bad shared secrets. If
multiple RADIUS servers are configured in this auth zone, the AP will switch to using the next
one in the list.
E
xamp
l
es
For device-id AP_00-0A-F5-00-01-89 , the RADIUS server 192.168.75.230:1812
from auth zone BldgOne failed to respond within 5 seconds and 3 attempts while
authenticating STA 00:0a:f5:00:05:f0 on radio 0 with user-id paul and SSID
NewYorkRm
S
ee
Al
so
Security: Management user login success
Notification that indicates the AP has determined that a management user login has succeeded
S
yntax
"For device-id %s, the management user '%s' with privilege level %d logged in
succesfully via %d"
RADIUS timeout The current setting of the RADIUS timeout
RADIUS retries The number of retries performed
Station MAC address of the station
Radio Radio interface on the AP
User Supplicant user ID established during EAPOL Authentication
exchange
SSID SSID on the AP to which the station has associated
Alarm Severity
Severity Critical
Alarm Parameters
DeviceId The device ID of the Airgo AP