User's Manual

Security: EAP user-ID timeout
Installation and User Guide: Airgo Access Point 313
interval. If this happens, the AP disassociates all STAs and prevents new STAs from
associating for a period of 60 seconds.
E
xamp
l
es
For device-id AP_00-0A-F5-00-01-89 , the TKIP counter-measures lockout period
has started for 60 seconds.
S
ee
Al
so
Security: EAP user-ID timeout
Notification that indicates the STA has failed to respond in a timely manner with its user ID during
the authentication exchange
S
yntax
"For device-id %s, the STA %s[%d] on radio %d and SSID %s did not send its
user-id in time to complete its auth sequence with auth-type %d and enc-type
%d."
D
escr
i
p
ti
on
This notification is generated when an STA fails to send its user ID in time to complete its
authentication sequence using the specified authentication type.
U
sage
G
u
id
e
li
nes
This indicates the failure of a STA to complete the EAP authentication exchange in a timely
fashion. The two authentication modes that require the STA to send its user ID are WPA EAP
and legacy 8021.x for dynamic WEP. This trap might indicate that a user prompt is not
attended to on the client side.
Alarm Parameters
DeviceId The device ID of the Airgo AP
Station The MAC address of the station
bpIndicator BP (1) or STA (0) supplicant
Radio Radio interface on the AP
SSID SSID on the AP to which the station has associated
Authentication type TLEGACY 8021.x (2) or WPA EAP (4)
Encryption Type WEP-64 (1), WEP-128 (2), TKIP (5), or AES (6)
Alarm Severity
Severity Critical