User's Manual

Security: EAPOL key exchange – message 2 timeout
Installation and User Guide: Airgo Access Point 315
sent from the RADIUS server – perhaps because it did not trust the RADIUS server’s
credentials.
E
xamp
l
es
For device-id AP_00-0A-F5-00-01-89 , the STA 00:0a:f5:00:05:f0 [0] on radio 0
with user paul and SSID NewYorkRm did not send an EAP-Response in time to
complete its auth sequence with auth-type 4 and enc-type 6
S
ee
Al
so
EAP User-ID Timeout, STA Authentication Timeout
Security: EAPOL key exchange – message 2 timeout
Notification that indicates the STA has failed to respond in a timely manner with EAPOL 4-way
handshake message number 2
S
yntax
"For device-id %s, the STA %s[%d] on radio %d with user %s and SSID %s did not
send the WPA EAPOL-Key Pairwise Messg #2 in time where auth-type %d and enc-
type %d"
D
escr
i
p
ti
on
This notification is generated when an STA fails to send the WPA EAPOL-key Pairwise
Message #2 in time to complete the pairwise key exchange.
U
sage
G
u
id
e
li
nes
This indicates the failure of a STA to complete the EAPOL 4-way key exchange in a timely
fashion.
Alarm Parameters
DeviceId The device ID of the AP
Station The MAC address of the station
bpIndicator BP (1) or STA (0) supplicant
Radio Radio interface on the AP
User User ID established during EAPOL Authentication exchange (if
applicable)
SSID SSID on the AP to which the station has associated
Authentication type WPA PSK (3) or WPA EAP (4)
Encryption Type TKIP (5) or AES (6)
Alarm Severity
Severity Critical