User's Manual

9 Managing the Network
184 Installation and User Guide: Airgo Access Point
Figure 131: Network Topology - AP Enrollment - Enrolled
Perform the following functions as needed from the Enrolled APs tab:
Viewing Backhaul Topology
Configuring a wireless backhaul extends wireless network coverage while reducing the number of
APs that must be connected to the wired network. Chapter 6, “Configuring a Wireless Backhaul,”
explains how to configure the Airgo AP to be part of a wireless backhaul. Once the wireless
backhaul structure is in place, use the Backhaul Topology panel in NM Portal to view all the
Function Description
Unenroll Remove the AP from the set of enrolled APs.
Refresh Update the screen display to reflect the most recent enrollment changes.
Reboot Reboot the selected AP.
Clic
k the IP address
link for an AP
Access the web interface for the selected AP in a new browser window.
NOTE: When an AP is unenrolled, the mutual trust between the NM Portal and the AP
is destroyed and the unenrolled AP resets to factory defaults. The AP cannot be
configured by NM Portal nor participate in the network (i.e., form a wireless backhaul)
without being enrolled again.