User's Manual

Using the Network Topology Menu
Installation and User Guide: Airgo Access Point 185
backhaul paths defined for the network. Choose Backhaul Topology from the Network Topology
menu to display this information (Figure 132).
Figure 132: Network Topology - Backhaul Topology
This panel contains the following information for each backhaul link:
Field Description
Channel ID RF channel over which the backhaul traffic travels.
Source AP AP that begins the backhaul trunk. The Source AP link opens the web
interface for the AP in a new browser window
Source Radio MAC address of the radio used for the uplink (wlan0 or wlan1)
Destination AP IP address of the AP that terminates the backhaul trunk.
Destination Radio MAC address of the radio (could be wlan0 or wlan1) that ends the backhaul
trunk
Retrunk Count The number of times a functioning backhaul radio reestablishes a trunk (a new
backhaul can be established to any AP within RF range, as retrunk does not
necessarily mean re-connection to the same AP; if the retrunk count is high,
the network has a high level of instability in its wireless inter-access point
connections)
Rediscover Now button Button that initiates the rediscovery process