User's Manual

Managing the System Configuration
Installation and User Guide: Airgo Access Point 243
The tab contains the following settings:
License Management
Use the License Management tab (Figure 179) if it is necessary to change the license key for the
AP. Enter or verify the license key for the AP, and click Apply. Click Reset to clear the field.
Figure 179: System Configuration - License Management
NMS Configuration
Use the NMS Configuration tab (Figure 180) to identify network management servers and to
determine which network management system will receive fault and event notifications.
Field Description
Syslog Level Select the activity level that triggers a syslog entry. Choose from several
levels (Emergency, Alert, Critical, Error, Warning, Notice, Info, or Debug).
(required)
Syslog-Level Module Select whether to record a specific type of activity, or include all the activities
in the list. (required)
Remote Syslog Logging Indicate whether to enable a remote server to monitor events across the
network.
Remote Syslog Server If the Syslog server is enabled, enter the remote server hostname or IP
address.
Remote Syslog Server
Port
If the Syslog server is enabled, enter the IP address or hostname of the server
port. (optional)
NOTE: If the AP is already enrolled, it is not necessary to modify the settings on this
panel. However, adding IP address does not automatically allow NM Portal or NMS to
manage the AP. The AP must be enrolled to be managed.